Chinese translation for "test bore"

检验钻孔
试验孔
试钻孔

Example Sentences:

	1.	The tests bear witness to the quality of this new car 这些实验证明了这辆新车的质量。
	2.	Error analyses and treatment of testing bearing capacity on boring concrete piles in accountant training center of liaocheng finance bureau 聊城财政局会计培训中心钻孔灌注桩试桩承载力差异分析及处理
	3.	Firstly , the testing bearing is designed and manufactured according to the theoretical pressure distribution of the inner and outer oil films as well as theoretical static and dynamic characteristic coefficients 首先，根据理论计算的内、外膜压力场分布及静、动特性参数，设计了该套轴承。
	4.	In the test , static - dynamic method is used to measure the stiffness , the eight stiffness coefficients of the radial part and the two stiffness coefficients of the thrust part can be obtained though loading slowly to the testing bearing which is in a equilibrium position 首先，对处于平衡位置的测试轴承分别沿水平方向、铅垂方向及轴向缓慢施加载荷，根据静动法原理求得各个转速下测试轴承径向部分内、外膜8个刚度系数以及推力部分内、外膜2个刚度系数。
	5.	In this paper , based on the theory of radial - thrust floating ring hybrid bearing , the dynamic characteristic test for this kind of hybrid bearing is accomplished on the self - made test stand , the dynamic characteristics of the testing bearing are got , and the dynamic characteristic coefficients of the thrust part of the bearing are measured for the first time , the result of the test is compared with the theoretical calculation 本文是在径向?推力联合浮环动静压轴承理论研究的基础上，利用自制的实验台完成了对该轴承的动特性试验研究，首次得到了测试轴承的动态特性，并将实验结果和理论计算进行了对比。
	6.	Exciting method is used to measure the damping , the four damping coefficients of the radial part and a damping coefficient of the thrust part can be obtained though hammering the testing bearing which is in a equilibrium position . based on the testing data , the dynamic characteristic curves of the radial - thrust floating ring hybrid bearing are drawn and compared with the theoretical curves 采用激振法测量轴承的阻尼，对处于平衡位置的测试轴承分别沿水平方向、上45度方向及轴向进行锤击，根据锤击法原理求得各个转速下轴承径向部分内、外膜总阻尼系数以及推力部分内、外膜总阻尼系数。
	7.	In the test , choose the angle contact bearing as test bearing , and work in the different position of spindle system , then test the temperature and vibration of the bearings in different speed and different loading , and analysis the data to verified the mathematics models 首先根据理论计算,选用适用于高速运转的一组角接触球轴承,各轴承处在轴系中不同位置,然后通过试验分别对各轴承的工作温度和轴系振动量进行测量,最后对数据进行分析,通过试验验证前面所建立的数学分析模型的正确性。

Similar Words：

"test board, test card" Chinese translation, "test board=testboard" Chinese translation, "test book example" Chinese translation, "test booster" Chinese translation, "test bop" Chinese translation, "test bore pattern" Chinese translation, "test borehole" Chinese translation, "test boring" Chinese translation, "test boring machine" Chinese translation, "test borings" Chinese translation